 |
patryn
Apprentice
Joined: 26 Sep 2001
Posts: 124
|
 Posted: Fri Jan 28, 2005 2:07 pm
Zone Scale Troubles in Automapper
|
I have a whole bunch of zones that i have mapped over the years, at least 20. One of them, however is buggy in the sense that it's scaling system seems to be completely off the charts.
What i mean by this is that the 'closest' zoom (4800%) looks more like a (16%) zoom on a normal zone. I cannot zoom in past this point, and as you can imagine, it's not very magnified, because although the zoom is set to 4800%, the zone looks like it's set on 16%.
Naturally, moving the zoom back down again only zooms it out even further.
Is there any way to remedy this? |
|
_________________
That which does not kill us, makes us stronger. |
 |
|
|
Vijilante
SubAdmin
Joined: 18 Nov 2001
Posts: 5187
|
Posted: Fri Jan 28, 2005 9:34 pm
|
Try using a Zone|Refresh from the menu. Other then that I am clueless as I have never seen such a problem.
|
|
_________________
The only good questions are the ones we have never answered before.
Search the Forums |
|
|
|
|
|
|
